SYDNEY • MELBOURNE • BRISBANE • PERTH • ADELAIDE

Shop

LENCARE SHOP

Filters

Showing 49–64 of 100 results

Series

49-64 of 100 products

  • $27.79 inc. GST
    Quickview

    RiteFit Rail Horizontal Rail Adaptors

    , , ,
    Made for a 38mm diameter tube, this product allows the tube to pass through it and is held in place by two grubs screws on either side of the underneath fixing lug. It then connects to the open slot section in the top of the multi purpose adaptor and is held in place by a tightened MPA-38 locating screw. It has bevelled edges on each side, allowing a smooth hand transition over the rail. We highly recommend the RiteFit Rails 38mm range be installed by a licenced trade professional. Please contact us for your local trade professional. 
    $27.79 inc. GST
    $27.79 inc. GST
  • From: $51.88 inc. GST
    Quickview

    RiteFit Rail Insert Brackets

    , , ,
    Similar to the basic design of the ARP-38 but instead of having the lug beneath, this has an insert adaptor that fits inside the vertical leg and is held in place by an appropriate adhesive, rivet or screw. The rail fits on to an adjustable cupped bracket and once the desired angle has been achieved, there is a provision to lock off that angle on the stem of the support bracket by allen key fixing. It has two fixing holes on the diagonal axis. The initial streamlined model requires the rail to fit flush with the top of the insert adaptor.  An alternative product with a tube hiding collar is a recent addition and is available now.  The two products remain identical other than that feature.
    From: $51.88 inc. GST
    From: $51.88 inc. GST
  • $148.25 inc. GST
    Quickview

    RiteFit Rail Knuckle Joints

    , ,
    Constructed on the same principles as the 32mm version but in a 38mm size. One notable difference is the more streamlined design in the centre of the product, allowing a smoother travel of the hand across the body of the product. It still allows the installer to pick up angles up to 111 degrees whilst offering a less bulky appearance. It still has the “gooseneck” operational features and is tightened by an allen key once the desired angle has been found. It also has a built in collar to cover the cut of the tubing and keep a smooth hand transition, particularly for elderly users. We highly recommend the RiteFit Rails 38mm range be installed by a licenced trade professional. Please contact us for your local trade professional. 
    $148.25 inc. GST
    $148.25 inc. GST
  • $44.47 inc. GST
    Quickview

    RiteFit Rail Leg Support Bracket

    , , ,
    At times there is a need to have a wall support bracket, especially when nearby wall surface can be used. This bracket provides that, as an auxiliary support device if deemed necessary. It extends straight from the wall 95mm to the furthest edge of the bracket. The bracket slides over the 38mm leg and is supported by a locating grub screw securing to the leg. It’s fixing plate measures 75mm x 40mm, hole positions 57mm centre to centre, 6.5 mm diameter. We highly recommend the RiteFit Rails 38mm range be installed by a licenced trade professional. Please contact us for your local trade professional. 
    $44.47 inc. GST
    $44.47 inc. GST
  • $68.56 inc. GST
    Quickview

    RiteFit Rail Leg Support Outrigger

    , , ,
    This brace is fitted on to the vertical leg and can provide a stabilising effect to the vertical post. The vertical post passes through the outrigger and is then secured to the ground by its 75mm diameter covered flange. The height of the outrigger is 600mm, this is to provide less movement on the vertical post. Additionally, a higher positioned brace is more noticeable to any occupant who may require extra support and will be less of a tripping hazard in those and other situations. A 4mm grub screw will tighten the outrigger to the post by tightening with the supplied hex key. We highly recommend the RiteFit Rails 38mm range be installed by a licenced trade professional. Please contact us for your local trade professional. 
    $68.56 inc. GST
    $68.56 inc. GST
  • From: $25.94 inc. GST
    Quickview

    RiteFit Rail Mid Rail Products

    , ,
    Many installs require a mid-rail element and our RiteFit Rail series has the rail and components to make this happen. By using the multi purpose adaptor into the tubing and connecting to the corresponding mid rail bracket, all scenarios can be achieved. All three mid rail adaptors are supplied with two grub screw locating fasteners. In most installs, they can away from view of the finished rail. Although these grub screws are a convenient and secure option, consideration needs to be given to the overall strength of that fixing, particularly if individuals may climb on to those mid rails. In that case, it is recommended that a rivet or screw fastening be an alternative fixing option. There are three mid rail bracket selections. A single ended bracket which can go on one side of a vertical post.   A double ended bracket which has a fitting on either side of the vertical post to allow a seamless continuation of the mid rail. Finally, a right angled bracket that will allow the installer to turn a mid-rail in a 90 degree direction. We highly recommend the RiteFit Rails 38mm range be installed by a licenced trade professional. Please contact us for your local trade professional. 
    From: $25.94 inc. GST
    From: $25.94 inc. GST
  • $24.26 inc. GST
    Quickview

    RiteFit Rail Reducing Adaptor

    , ,
    This item is a reducing adaptor, built along the same lines as the HRA-38 but made for a 32mm tube. The idea comes from installers who want the additional strength of the 38mm system but are using 32mm tubing. It can be used in 32mm horizontal rail installs, (which has no vertical leg component) where a vertical leg is situationally required for the install but without losing the 32mm rail aspect. Some end users may not have the hand capacity or strength to utilize a 38mm rail system, situations like those are ideal for this product. Like it’s 38mm counterpart, this product is built exactly the same but the through hole size is reduced to accommodate 32mm tubing. It fits exactly the same way to the multi purpose adaptor as the 38mm model. It too has bevelled edges either side of the product, offering a smooth hand transition. Tightened to the tubing by the grub screw at the underneath front of the product. We highly recommend the RiteFit Rails 38mm range be installed by a licenced trade professional. Please contact us for your local trade professional. 
    $24.26 inc. GST
    $24.26 inc. GST
  • $11.12 inc. GST
    Quickview

    RiteFit Rail Saddle Brackets

    , , ,
    This U shaped fixing bracket is similar in design to the saddles used throughout the plumbing industry. Made to fit over a 38mm tube. Provided with two stainless steel fixing screws and washers. Made of stainless steel. We highly recommend the RiteFit Rails 38mm range be installed by a licenced trade professional. Please contact us for your local trade professional. 
    $11.12 inc. GST
    $11.12 inc. GST
  • $38.91 inc. GST
    Quickview

    RiteFit Rail Straight Ends

    , ,
    A straight fixing end in 38mm. Has a 75mm diameter flange and cover plate and it’s swaged end allows a tube to fit straight on to the end. Provided with one dress ring. We highly recommend the RiteFit Rails 38mm range be installed by a licenced trade professional. Please contact us for your local trade professional. 
    $38.91 inc. GST
    $38.91 inc. GST
  • From: $32.62 inc. GST
    Quickview

    RiteFit Rail Straight Joiner

    , ,
    Simple in design, this straight joiner for 38mm tubing has a swage at each end, 120mm of centre tube and is provided with two dress rings. A new model is due with is a more streamlined joiner. This model only shows one centred dress ring, which is welded to the joining piece. The tube edges are positioned beneath that. Each swaged end of the joiner is covered by the tubing. It allows for a more streamlined look. We highly recommend the RiteFit Rails 38mm range be installed by a licenced trade professional. Please contact us for your local trade professional. 
    From: $32.62 inc. GST
    From: $32.62 inc. GST
  • $40.77 inc. GST
    Quickview

    RiteFit Rail Styled Hook End

    , ,
    This hook end is more boutique, has a neat 90 degree turn with a built in dress ring and is a one piece unit that includes a seamless stainless steel end cap as part of the product. Can be purposefully used for internal or external applications. We highly recommend the RiteFit Rails 38mm range be installed by a licenced trade professional. Please contact us for your local trade professional. 
    $40.77 inc. GST
    $40.77 inc. GST
  • $20.38 inc. GST
    Quickview

    RiteFit Rail Support Brackets

    , , ,
    This cupped plate bracket works with the multi purpose adaptor and is designed to have a tube placed upon it. It’s designed that way to offer a full 270 degrees of hand clearance. It has two fixing holes on a diagonal axis. The lug on the bottom of the plate engages with the multi purpose adaptor, allowing the installer to pick an appropriate angle of the rail.
    $20.38 inc. GST
    $20.38 inc. GST
  • $59.30 inc. GST
    Quickview

    RiteFit Rail Through Bracket

    , , ,
    This bracket allows a 38mm tube to pass through it and the tube is held into place by tightening the allen key at the underneath front of the bracket. This means no screwing into the rail is required unless you choose to do so. The edges of the through bracket are bevelled to provide a smoother transition of hand movement over the rail. We highly recommend the RiteFit Rails 38mm range be installed by a licenced trade professional. Please contact us for your local trade professional. 
    $59.30 inc. GST
    $59.30 inc. GST
  • From: $46.32 inc. GST
    Quickview

    RiteFit Rail Tubing

    , ,
    There are two models of tubing to select from. One being just plain tubing, the other being swaged tube. The plain tubing is in lengths of 1000mm, 1500mm, 1900mm and 2900mm. The swaged tubing is crimped on one end, enabling it to be linked into an open ended tube, ideal for when creating longer expanses of continual railing. Also sold in the same sized lengths. For the swaged tubing, a dress ring is supplied to cover any cut or joining piece. This makes it safer for the end user, as well as enhancing the appearance of the rail. We highly recommend the RiteFit Rails 38mm range be installed by a licenced trade professional. Please contact us for your local trade professional. 
    From: $46.32 inc. GST
    From: $46.32 inc. GST
  • From: $55.59 inc. GST
    Quickview

    RiteFit Rail Under Bracket

    , , ,
    A hand rail support bracket made for the RiteFit range. Has a 75mm flange with a flange cover provided, a cupped plate (measures 60mm) with two fixing holes of 4.5mm diameter which are 43mm apart. There is a second model available that is an extended version. This has been manufactured to allow a rail to comfortable pass a stormwater pipe or guttering that may be attached to the outside of a building. This model is 75mm deeper than the standard one, making it 150mm in depth from it’s fixing point.
    From: $55.59 inc. GST
    From: $55.59 inc. GST
  • From: $81.53 inc. GST
    Quickview

    RiteFit Rail Vertical Leg

    , , ,
    The range has four size legs – a standard 820mm, a 1000mm, a 1500mm and a 1300mm leg with offset horizontal pins for core drilled situations. The standard 820mm leg is made to that height to try and minimise cutting on site. Once the dimensions of the adaptor and the tube are added, the overall height of the leg will be around 920mm. A new addition is an offset leg. The vertical leg is positioned on the edge of the fixing plate, allowing it to be positioned closer to a path or any other similar fixing where that additional closeness may be required. Due to the positioning of the leg, there are 5 fixing holes on this model. Supplied with an offset cover flange. Available lengths include 820mm, 1000mm & 1500mm. The vertical leg made for core drilling does not come with a flange or flange cover. Once concreted into position however, spare flange covers can be purchased to finish off the job. We highly recommend the RiteFit Rails 38mm range be installed by a licenced trade professional. Please contact us for your local trade professional. 
    From: $81.53 inc. GST
    From: $81.53 inc. GST