SYDNEY • MELBOURNE • BRISBANE • PERTH • ADELAIDE

Legs

Filters

Showing all 3 results

Series

3 products

  • $44.47 inc. GST
    Select options
    Quickview

    RiteFit Rail Leg Support Bracket

    , , ,
    At times there is a need to have a wall support bracket, especially when nearby wall surface can be used. This bracket provides that, as an auxiliary support device if deemed necessary. It extends straight from the wall 95mm to the furthest edge of the bracket. The bracket slides over the 38mm leg and is supported by a locating grub screw securing to the leg. It’s fixing plate measures 75mm x 40mm, hole positions 57mm centre to centre, 6.5 mm diameter. We highly recommend the RiteFit Rails 38mm range be installed by a licenced trade professional. Please contact us for your local trade professional. 
    $44.47 inc. GST
    $44.47 inc. GST
    Select options
  • $68.56 inc. GST
    Select options
    Quickview

    RiteFit Rail Leg Support Outrigger

    , , ,
    This brace is fitted on to the vertical leg and can provide a stabilising effect to the vertical post. The vertical post passes through the outrigger and is then secured to the ground by its 75mm diameter covered flange. The height of the outrigger is 600mm, this is to provide less movement on the vertical post. Additionally, a higher positioned brace is more noticeable to any occupant who may require extra support and will be less of a tripping hazard in those and other situations. A 4mm grub screw will tighten the outrigger to the post by tightening with the supplied hex key. We highly recommend the RiteFit Rails 38mm range be installed by a licenced trade professional. Please contact us for your local trade professional. 
    $68.56 inc. GST
    $68.56 inc. GST
    Select options
  • From: $81.53 inc. GST
    Select options
    Quickview

    RiteFit Rail Vertical Leg

    , , ,
    The range has four size legs – a standard 820mm, a 1000mm, a 1500mm and a 1300mm leg with offset horizontal pins for core drilled situations. The standard 820mm leg is made to that height to try and minimise cutting on site. Once the dimensions of the adaptor and the tube are added, the overall height of the leg will be around 920mm. A new addition is an offset leg. The vertical leg is positioned on the edge of the fixing plate, allowing it to be positioned closer to a path or any other similar fixing where that additional closeness may be required. Due to the positioning of the leg, there are 5 fixing holes on this model. Supplied with an offset cover flange. Available lengths include 820mm, 1000mm & 1500mm. The vertical leg made for core drilling does not come with a flange or flange cover. Once concreted into position however, spare flange covers can be purchased to finish off the job. We highly recommend the RiteFit Rails 38mm range be installed by a licenced trade professional. Please contact us for your local trade professional. 
    From: $81.53 inc. GST
    From: $81.53 inc. GST
    Select options