RiteFit Rail Vertical Leg
From: $81.53 inc. GST
The range has four size legs – a standard 820mm, a 1000mm, a 1500mm and a 1300mm leg with offset horizontal pins for core drilled situations. The standard 820mm leg is made to that height to try and minimise cutting on site. Once the dimensions of the adaptor and the tube are added, the overall height of the leg will be around 920mm.
A new addition is an offset leg. The vertical leg is positioned on the edge of the fixing plate, allowing it to be positioned closer to a path or any other similar fixing where that additional closeness may be required. Due to the positioning of the leg, there are 5 fixing holes on this model. Supplied with an offset cover flange. Available lengths include 820mm, 1000mm & 1500mm.
The vertical leg made for core drilling does not come with a flange or flange cover. Once concreted into position however, spare flange covers can be purchased to finish off the job.
We highly recommend the RiteFit Rails 38mm range be installed by a licenced trade professional. Please contact us for your local trade professional.
The range has four size legs – a standard 820mm, a 1000mm, a 1500mm and a 1300mm leg with offset horizontal pins for core drilled situations. The standard 820mm leg is made to that height to try and minimise cutting on site. Once the dimensions of the adaptor and the tube are added, the overall height of the leg will be around 920mm.
A new addition is an offset leg. The vertical leg is positioned on the edge of the fixing plate, allowing it to be positioned closer to a path or any other similar fixing where that additional closeness may be required. Due to the positioning of the leg, there are 5 fixing holes on this model. Supplied with an offset cover flange. Available lengths include 820mm, 1000mm & 1500mm.
The vertical leg made for core drilling does not come with a flange or flange cover. Once concreted into position however, spare flange covers can be purchased to finish off the job.
We highly recommend the RiteFit Rails 38mm range be installed by a licenced trade professional. Please contact us for your local trade professional.
The Steri-Gard products extend to standard sized 32mm diameter grab rails and modular products. Any product amongst these ranges which has that gap between those two surfaces is included. They have all the same attributes as the standard range of concealed fix grab rails. Sizes available again mirror image that of the standard range, from 300mm up to 1200mm. Only available in a brushed stainless steel finish. Colour options are not available due to the baking process required and the resultant compromising of the silicone seal.
SYDNEY • MELBOURNE • BRISBANE • PERTH • ADELAIDE
Modular Combination Elbow Ends
Rail Series, Modular, Towel Grab Rail
Modular Straight Joiners
Rail Series, Modular, Straight Joiner
Flat Flange Single Hole Grab Rail
Rail Series, Grab Rails, Single Hole
